Decal Resources

USS FLAGG CUSTOM DECALS

Custom Flagg Decals & Placement Images By Section

DECAL PLACEMENT FOR THE SUPERSTRUCTURE (THE ISLAND)
Right click on image and select "Open Image in New Tab".

Decal Placement for Superstructure (Starboard Side)

Decal Placement for Superstructure (Port Side)

Decal Placement for Superstructure (Bow Side)

Decal Placement for Superstructure (Stern Side)

Decal Placement for Bridge Consoles

Decal Placement for Combat Computer

Decal Placement for Radioman's Computer

Decal Placement for Bulkhead Wall "B"

NOTE: The GI Joe logo decals are best printed on a white vinyl sticker sheet.

#GI09 (95) Decal under Bridge Windows (Print Size: 13.57cm x 3.02cm)

#GI10 (25) Decal along side of the Superstructure Top (Print Size: 16.24cm x 2cm)

#GI11 (94) Decal above Flight Deck Door (Print Size: 8.07cm x 2cm)

#GI12 (26) Decal below Flag Post on top of Superstructure (Print Size: 8cm x 2.15cm)

#99A1 (17) Decal without Background (Print Size: 5.1cm x 4cm)

#99B1 (17) Decal on the Superstructure Top (Print Size: 5.8cm x 4.71cm)

#99A2 (18) Decal without Background (Print Size: 2.9cm x 4cm)

#99B2 (18) Decal on the Superstructure Top (Print Size: 3.75cm x 5cm)

#9943 (18) and/or #9953 (17) Decal of the Original Design for Superstructure. (#9943 = 4cm tall, #9953 = 5cm tall)

(35) Print on transparent sticker paper. Cricut will cut as a single decal.

(35) Cut (DO NOT PRINT) on Black Vinyl. Cricut will cut three separate vinyl decals.

(64) Modern Design with L/R Option (Print Size: 2cm x 1.2cm)

(16) Can be printed on transparent or white background. (Print Size: 6.5cm x 0.54cm)

(15) Print on transparent sticker paper. (Print Size: 1.8cm x 0.5cm)

(9) Print on transparent paper.

(10) Print on transparent paper.

Optional decal for your custom base.

(71) Print of transparent paper.

Optional decal for your custom base.

(24) Can be printed on white or transparent paper.

(7) Print on transparent paper.

(8) Print on transparent paper.

(29) Print of transparent paper.

(29) Warning Reset Meter

(8) Bulkhead Door Must Latch Securely Decal

(22) Service Cath Bearings (Print Size: 2cm x 1.6cm)

(67) Danger No Smoking

Flag print size is 3.68cm x 2.71cm.

#FLA1 (77) United States of America

#FLB1 (77) United Kingdom

#FLC1 (77) Canada

#FLD1 (77) Australia

#FLE1 (77) Cobra

#FLA2 (76) United States of America

#FLB2 (76) United Kingdom

#FLC2 (76) Canada

#FLD2 (76) Australia

#FLE2 (76) Cobra

2026 Special Edition: America 250 Flag

Custom for S. Kelly: Irish Flag

GI Joe Crest with Irish Flag

PNG Frame Template to Create Your Own Flag Design

PNG Crest Template to Create Your Own Crest Design

#FLF2 (76) Traditional Crest

DECAL PLACEMENT THE FLIGHT DECK
Right click on image and select "Open Image in New Tab".

Decal Placement for Flight Deck

Decal Placement for Blast Deflector

Jet Blast Deflector (JBD) System

The decals for the JBD System are best printed on transparent sticker paper.

(46) Danger Stand Clear

(47) Oil Feed Line

(47) Hydraulic Feed Line (Alternate Wording)

"99" Bow Flight Deck

The "99" Deck Decal is designed to print at the same size as the original.
NOTE: Numbers 2, 4, 5, and 7 are missing as they don't fit in the molded placement location on the flight deck. Number 6 is missing because you can simply print the 9 and turn it upside-down.
PRINT SIZE: The Print Size is the same for all numbers: 14.5cm x 25.29cm.

#FD00 (1) Decal "0"

#FD01 (1) Decal "1"

#FD03 (1) Decal "3"

#FD08 (1) Decal "8"

#FD09 (1) Decal "6" or "9"

Here is a solution for getting the alternative numbers to fit inside the size and shape of the number placements of the flight deck. The PNGs reduce the size of the number while maintaining the size and shape of the decal. Send us photos of your alternative numbers!

Stern Flight Deck

#SD01 (2) Stern Deck Decal (Print Size: 42.5cm x 3.175cm)

#SDL2 (3) Stern Deck Left Decal (Print Size: 27.78cm x 3.48cm)

#SDC2 (5) Stern Deck Center Decal (Print Size: 21.26cm x 1.27cm)

#SDR2 (4) Stern Deck Right Decal (Print Size: 16.27cm x 3.48cm)

Elevator Deck (Coming Soon!)

Forward Center Flight Deck (Coming Soon!)

Center Flight Deck (Coming Soon!)

DECAL PLACEMENT BOW, STERN, & FANTAIL DECK
Right click on image and select "Open Image in New Tab".

Decal Placement for Stern

Decal Placement for Fantail Deck

Decal Placement for Naval Guns & Missile Controls

Decal Placement for Crane and Stern Sides

Decal Placement for Bow

PRINT THESE ON WHITE VINYL DECAL PAPER

#STA1 (1) Stern Decal Original Design with Modified Kerning (Print Size: 7cm x 1cm)

#STB1 (1) Stern Decal Modern Design

#STC1 (1) Stern Decal Modern Design (Without Periods)

#FD01 (45) Caution Sign (Print Size: 1.6cm x 1.3cm)

#FDB2 (11) Air Flow Decal (Print Size: 1.0cm x 1.3cm)

#FDB6 (8) Bulkhead Door Must Latch Securely Decal

PRINT THESE ON TRANSPARENT DECAL PAPER

#FDA2 (11) Air Flow Decal (Print Size: 1.0cm x 1.3cm)

#FDA3 (38) Caution Decal (Print Size: 2.3cm x 0.55cm)

#FDA4 (4) Watch Step with Arrows

#FDB4 (4) Watch Step Text Only

#FDC4 (4) Watch Step with Caution Tape

#FDA5 (34) Watch Head Decal

#FDB5 (34) Watch Head Decal

#FDA6 (8) Bulkhead Door Must Latch Securely Decal

#NG01 (37) Sensor Access (Print Size: 1.3cm x 0.5cm)

#MC01 (59) Missile Control Decal (Print Size: 1.2cm x 0.4cm)

#MC02 (44) Missile Control Decal (Print 1cm x 1cm)

DECAL PLACEMENT MISSILE LAUNCH SYSTEM
Right click on image and select "Open Image in New Tab".

Decal Placement for Missiles

Decal Placement for Missile Box

CUT FROM A BLACK VINYL SHEET

#ML01 (63) Missile Decal (Print Size: 4.45cm x 2.73cm) - Cut from a sheet of black vinyl for best results.

#ML02 Missile Silhouette for your creative use ideas.

PRINT THESE ON WHITE VINYL DECAL PAPER

#MLA3 (61) Missile Decal Traditional Design (Print Size: 1.5cm x 0.8cm)

#MLB3 (61) Missile Decal with GI Joe Colors (Print Size: 1.5cm x 0.8cm)

#ML04 (31) Missile Box Decal x2 (Print Size: 1.6cm x 1.3cm)

#ML05 Missile Box Decal (Print Size: 1.6cm x 1.3cm)

#ML06 (60) Missile Box Decal (Print Size: 2.1cm x 1.3cm)

PRINT THESE ON TRANSPARENT DECAL PAPER

#ML07 (62) Missile Decal (Print Size: 2.9cm x 0.46cm)

DECAL PLACEMENT FOR TOW VEHICLE & FUEL TRAILER
Right click on image and select "Open Image in New Tab".

NOTE: The "Shroud Lift" decal (93) should have the arrow pointing toward the "L-shaped" lift handle located on each side of the fuel trailer. The original decal placement sheet shows the decal on top of the fuel trailer facing the wrong direction. If the decal is placed on top of the trailer, the arrow should point outward. If the decals are placed on the sides of the trailer, they should point up. The shroud is the metal cover that protects the trailer from fuel spilling into the mechanical area. The shroud lifts are the handles that lift to remove the shroud and reveal the mechanical workings of the fuel trailer.

Decal Placement for Tow Vehicle & Fuel Trailer

Decal Placement for Rear of Fuel Trailer

Decal Upgrade for Fuel Trailer

Decal Placement for Fuel Trailer

Decal Placement for Tow Vehicle

Tow Vehicle Pulling Fuel Trailer

Equipment Upgrade for Fuel Trailer

PRINT THESE ON WHITE VINYL DECAL PAPER

#TV01 (85) Decal for Tow Vehicle Engine Cover. (Print Size: 2.5cm x 0.62cm)

#TVA2 (83A) American Flag Decal for Tow Vehicle. (Print Size: 1cm x 0.53cm)

#TVB2 (83A) Square Flag Decal for Tow Vehicle (Print Size: 1cm x 1cm)

#TV03 (80) Caution Checkers (x2) for the Tow Vehicle. (Print Size: 2.5cm x 1cm). NOTE: The sides are curved to match the Tow Vehicle instead of straight cuts.

#FT01 Flammable Placard for the back of the Fuel Trailer. (Print Size: 1.5cm x 1.5cm)

#FT02 Flammable Placard for the back of the Fuel Trailer. (Print Size: 1.5cm x 1.5cm)

#FT03 Top Nozzle Hook Reflectors (x2) for the back of the Fuel Trailer. (Print Size: 0.2cm x 0.5cm)

#FT04 (92A) Danger Decal for Fuel Trailer. (Print Size: 0.74cm x 0.74cm)

#FT05 (90) Stars (x2) for the side of the Fuel Trailer. (Print Size: 1.24cm x 1.2cm)

#FT06 (88) Caution Signs (x3). One on each side of the Fuel Trailer and one on the side of the Tow Vehicle. (Print Size: 1.6cm x 1.3cm)

PRINT THESE ON TRANSPARENT DECAL PAPER

#FT07 (78 & 91) Tow Vehicle & Fuel Trailer Numbers. You may have more than one of each vehicle and want to number them accordingly. You'll need two of each number, one for each side. (Fuel Trailer Print Size: 14.1cm x 1.3cm, Tow Vehicle Print Size: 16.3cm x 1.5cm)

#FT08 (89) Flammable Decal (x2) for the Fuel Trailer. (Print Size: 4cm x 0.85cm)

#FT09 (93) Shroud Lift Decal (x2) for the Fuel Trailer. (Print Size: 1.32cm x 0.85cm)

#FT10 (92B) Danger Decal for Fuel Trailer. (Print Size: 1cm x 0.74cm)

#FT11 (88) Caution Decal (Print Size: 1.9cm x 1.0cm)

#TV04 (83B) Decal for the Tow Vehicle. It goes underneath the American Flag. (Print Size: 1.2cm x 0.2cm)

#TV05 (79) United States Decal (x2) for the Tow Vehicle. (Print Size: 2.5cm x 0.37cm)

#TV06 (82) Unlatch Decal for the Tow Vehicle. (Print Size: 1.3cm x 0.67cm)

#TV07 (81) Caution Decal (Print Size: 1.8cm x 1.3cm)

#TV08 (84) Caution Decal (Print Size: 0.82cm x 0.74cm)

FUN FACT: The Admiral's Launch is not a "lifeboat." It is a transport boat for a variety of uses. Aircraft Carriers instead carry inflatable life-rafts that are stored along the side of the ship in metal pods. All navy ships carry enough life-rafts to cover 110% of the ship's full occupancy.

DECAL PLACEMENT FOR THE DAVITS & ADMIRAL'S LAUNCH
Right click on image and select "Open Image in New Tab".

Decal Placement for Lifeboat Davits & Admiral's Launch

The Admiral's Launch

New Custom Admiral's Launch Decal

Updated Decal (50) to Increase Visibility of "FLAGG"

New Custom Admiral's Launch Decal

"99" Decal (51) on Each Side of Admiral's Launch

Proper Placement of Interior Decals

PRINT THESE ON WHITE VINYL DECAL PAPER
Right click on image and select "Save Image As".

#ALA1 (50) Flagg Decal Use Cricut on White Vinyl and Use Transfer Tape to Apply to Admiral's Launch

#ALB1 (50) Flagg Decal with Black Stroke & Shadow (Print Size: 2cm x 0.7cm)

#ALA2 (51) "99" Decal for Admiral's Launch

#ALB2 (51) "99" Decal for Admiral's Launch

#ALA3 (54) First Aid Kit for Admiral's Launch

PRINT THESE ON TRANSPARENT DECAL PAPER
Right click on image and select "Save Image As".

#ALC1 (50) Flagg Decal

#ALC2 (51) "99" Decal for Admiral's Launch

#ALC3 (54) First Aid Kit for Admiral's Launch (Print Size: 0.88cm x 0.6cm)

#AL04 (55) Cover Release Decal for Admiral's Launch (Print Size: 1.8cm x 0.5cm)

#ALR5 (52) Lift Decal (Right) for Admiral's Launch (Print Size: 0.8cm x 0.4cm)

#ALL5 (53) Lift Decal (Left) for Admiral's Launch (Print Size: 0.8cm x 0.4cm)

#AL06 Admiral's Launch Decal (Print Size: 4.9cm x 0.5cm)

#DV01 (49) Caution Decal for the Davits

There are two microphone and loudspeaker models (i.e. Fenix and Sunlite) that resemble the one from the USS Flagg. Both of them are yellow and neither of them make the same sounds as the Flagg's original microphone and loudspeaker. However, you may decide to use them for replacement parts or even create a custom microphone and loudspeaker as pictured below.

DECAL PLACEMENT FOR MICROPHONE & LOUDSPEAKER
Right click on image and select "Open Image in New Tab".

Decal Placement for Microphone & Loudspeaker

Decal Placement for Sunlite Version

Logo looks best when attached horizontal.

Fenix Version (NOTE: Toggle Switch on Microphone)

FENIX

Sunlite Version (NOTE: Second Switch on Loudspeaker)

SUNLITE

Original Microphone

Sunlite Microphone

Fenix Microphone

PRINT THESE ON WHITE VINYL DECAL PAPER
Right click on image and select "Save Image As".

#LS01 (97) Logo Decal for Loudspeaker on All Versions

#LS02 Switch Decal for Loudspeaker Sunlite Version

#LS03 Admirals Club Decal for Your Creative Use

#MP01 (96) Microphone Decal for Original & Fenix Versions with OG Design (Print Size: 4.15cm x 3.75cm)

#MP02 (96) Microphone Decal for Original & Fenix Versions (Print Size: 4.15cm x 3.75cm)

#MP03 (96) Microphone Decal for Original & Fenix Versions (Print Size: 4.15cm x 3.75cm)

#MP04 (96) Microphone Decal for Original & Fenix Versions (Print Size: 4.15cm x 3.75cm)

#MP05 (96) Microphone Decal for Original & Fenix Versions (Print Size: 4.15cm x 3.75cm)

#MP06 (96) Microphone Template for Original & Fenix Versions (Create your own background image and logo.)

#MP07 (96) Microphone Decal for Sunlite Version (Print Size: 3.9cm x 4.17cm)

#MP08 (96) Microphone Template for Sunlite Version (Create your own background image and logo.)